PICOScope 9000 Series

PICO

High Bandwidth, High Effective Sampling Rate

With up to 25 GHz bandwidth, the PicoScope 9300 sampling oscilloscopes address digital and telecommunications applications of 10 Gb/s and higher, microwave applications up to 25 GHz and timing applications with a resolution down to 64 fs. Optional 11.3 Gb/s clock recovery, optical to electrical converter or differential, deskewable time domain reflectometry sources (60 ps/7 V) complete a powerful, small-footprint and cost-effective measurement package. These units occupy very little space on your workbench and are small enough to carry with your laptop for on-site testing, but that’s not all. Instead of using remote probe heads attached to a large bench-top unit, you can position the scope right next to the device under test. Now all that lies between your scope and the DUT is a short, low-loss coaxial cable. Everything you need is built into the oscilloscope, with no expensive hardware or software add-ons to worry about.

Specification

PicoScope 9301-15

2 Channels
15 GHz Bandwidth, full
15 TS/s (64 fs) sequential sampling
Intuitive, touch-compatible Windows user interface
Comprehensive built-in measurements, histogramming, and editable data mask library

PicoScope 9302-15

2 Channels
15 GHz Bandwidth, full
15 TS/s (64 fs) sequential sampling
6.5 Mb/s to 11.3 Gb/s clock recovery input
Intuitive, touch-compatible Windows user interface
Comprehensive built-in measurements, histogramming, and editable data mask library

PicoScope 9302-25

2 Channels
25 GHz Bandwidth, full
15 TS/s (64 fs) sequential sampling
6.5 Mb/s to 11.3 Gb/s clock recovery input
Intuitive, touch-compatible Windows user interface
Comprehensive built-in measurements, histogramming, and editable data mask library

PicoScope 9341-25

4 Channels
25 GHz (17.5 ps) bandwidth
1 MS/s sample rate to 32 kS store
64 fs, 15 THz effective sample rate
14 GHz prescaled & 2.5 GHz direct trigger
Pattern sync trigger of length 7 to 223-1
1.8 ps typical RMS jitter
16-bit ADC resolution

PicoScope 9402-05

SXRT0 (Sampler-extended Real Time Oscilloscope)
2 input channels
5 GHz bandwidth, 70 ps transition time
12-bit 500 MS/s ADCs, ±800 mV full-scale input range into 50 Ω
Pulse, eye, and mask testing to 45 ps and up to 11 Gb/s
1 TS/s (1 ps resolution) random equivalent-time sampling

PicoScope 9402-16

SXRTO (Sampler-extended Real Time Oscilloscope)
2 Number of input channels
16 GHz bandwidth, 22 ps transition time
12-bit 500 MS/s ADCs, ±800 mV full-scale input range into 50 Ω
Pulse, eye, and mask testing down to 45 ps and up to 11 Gb/s
10 mV/div to 0.25 V/div digital gain ranges

PicoScope 9404-05

SXRTO (Sampler-extended Real Time Oscilloscope)
4 Number of input channels
5 GHz bandwidth, 70 ps transition time
1 TS/s (1 ps) equivalent-time sampling
Four 12-bit 500 MS/s ADCs
Up to 2 million triggered captures/sec
Pulse, eye, and mask testing to 70 ps and 3 Gb/s
±800 mV full-scale input range into 50 ohms

PicoScope 9404-16

SXRTO (Sampler-extended Real Time Oscilloscope)
4 Number of input channels
16 GHz bandwidth, 22 ps transition time
Pulse, eye, and mask testing down to 100 ps and up to 8 Gb/s
Four 12-bit 500 MS/s ADCs
±800 mV full-scale input range into 50 Ω
10 mV/div to 0.25 V/div ranges provided by digital gain